INTRODUCTION
The complete range of semi-automatic machinery and equipments for producing drum barrel and buckets in various ranges for packing edible oil, paint, chemical, petrochemical and petroleum products. The importance of our machines lies in the modern and functional design based on many years of development, finest workmanship backed by a team of first class craftsmanship. To day the firm is a leader in steel metal machinery, which not only covers a range of drum barrel and buckets plants but also tin plate container manufacturing machinery plant. We export to the sophisticated world markets, a proof of our top quality and superior craftsmanship.

1)SHEARING MACHINE
This machine is requitred for cutting sized body blank & top bottom blanks from a sheet or a coil. The basic structure is steel fabricated that gives it an extra strength and rigidity. for smooth & trouble free operation, an appropriate lubricating system is provided everywhere. The shearing blades are made out of best quality material, hardened and ground to its best standard, both the blades are reversible type so that all the four edges can be utilized, giving the blades and extra lift. All the moving parts (Bushing) are made up of phosphorus bronze. the maximum speed is given to achieve more production.

2) DOUBLE EDGE GRINDING MACHINE
Edge grinding is very special operation in manufacturing of Drums & Barrels, because some amount of material is to be removed from the edges of the bodym which give advantages to A) Welding operations 9removes dirt, oiliness etc), extra strength to the weld and a leak proof joint. B) Flanging operation. C) End seaming operation (lesser thickness of side seam overlap). Maximum parts of the machine ate steel fabricated. It can absorb all the jerks & vibration caused due to the grinding wheel. Proper dressing arrangement is for smooth grinding. the entire machine is divided in 3 parts as A) Centre table on fixed guide rails by means of pnuematically operated long cylinder. B) Right hand side grinding unit. C) Left hand side drinding unit. All the tree units are properly assembled; micro setting arrangement is given for maintaining highly precise gap between the grinding wheels.

3) ROUND ROLLING MACHINE
The machine serves to roll all sorts of drum bodies and it has a very high output. This machine can be operated easily and can be adjusted rapidly for drum bodies of various diameters. The rolls are of best quality steel and run on gun metal bearings. The gears are machine cut and encased. The adjustable curving plate enables bodies to be rolled practically as small as the top roller.

4) SPOT WELDING
The rocker arm spot welding machine is an important machine in manufacturing Drums & Barrels. It is better to give some spots to the body sides before side seam welding operation. The machine can also be used for spot welding the handles etc., this machine is specially designed with a longer arm, bettr rated transformer & electronic timer, also given are various tapping to transformer for welding current selection enabling universal use.

5) SIDE SEAM WELDING MACHINE

The illustrated model is for side seaming to the full-length of the hollow drum and barrel body. Machine body is reinforced fabricated steel structure with a heavy duty transformer used as the main power source, for continuous welding operations. The machine is equipped with upper and lower weld wheel assembly, water cooling system and built in welding transformer.

6) BEAD EXPANDER (HYDRAULIC TYPE)

This machine gives beading to the drum or the barrel. This bead gives an extra strength to the body cell.It also contains sets of segment made out of finest quality heat treated ateel along with hydraulic power pack of all standard parts, high quality flexible tubing, and logic & control panel. Hydraulic cylinder etc. of this machine is very fast & the rejection rate is absolutely nill compared to rotary type bead machine. A seperate power pack is provided. In case of lower production rate, single tooling bead expander can be used. Double beading machine gives both beads at one stroke. Normal, unskilled operator can also operate this machine.

7) MULTI CORRUGATION MACHINE(ROTARY TYPE)

This machine is required for giving corrugation to the drum or the barrel. The illustrated model is a single stage corrugating machine where in one operation, we get a half body after turning in next operation we get another half body, this extremely silent, heavy duty & stable machine uses a specially designed gear box. Its strong drive is the main feature of this machine & the tooling is made up of best quality steel. Pneumatic cylinder is also given a heavy duty, so that the machine will minimize the jerks while overlapping of body drums & barrels. For various diameters a seperate tool is not required.

8) FLANGING MACHINE (ROTARY TYPE)

This machine is required for giving flange to the drums or barrel, by changing the rollers, the same machine can be used for single beading too. The illustrated model has flanging tool where in one stroke, we get one side flanging & by turning the body we get another side flanging. body is fabricated with heavy dutry gear & very stable structural design gives trouble free operation. Main features of this machine are strong drive, heavy duty pneumatic cylinder, hardened & ground tooling; this all together gives jerk free operation which is essential for best quality flanges, ultimately better flange gives better leak proof end seam. For different diameters, seperate tools are not required.

9) DOUBLE ENDED FLANGING MACHINE (HYDRAULIC)

The machine is required for giving flange to the drum or the barrel. For getting good end seam, proper even flange is essential. This machine contains two flanging tools made out of good quality steel, which are heat treated and ground. It also has a seperate hydraulic power pack of all standard parts, highly flexible tubing, logic, and control [panel, high quality hydraulic cylinder etc. The main advantage in this machine is that re=jection rate is almost nil and gives both the flange simultaneously, it also gives very fast trouble free production, and unskilled operator also can operate this machine. operation is very safe because drum does not rpotate. WQe get even flange and very precise diameter of drum and barrel bosy, no bucking, no unevenness of flange, no wrinkle to flange (usually all this defects are experienced in rotary flanging machines).

10) CIRCLE CUTTING MACHINE

The circle cutting machine is robust in construction and capable of shearing to specified capacity with ease for precise circles which are cut without leaving any roughness on the edges. ( For top bottom )