| 1 TO
4 KGS./LITRES ROUND CONTAINER |
| |
INTRODUCTION
Jethwa's versatile semi-automatic machinery has
been made; with a view to keep in 
mind the various requirements of the tin can making
industry. We present to you the whole range of semi-automatic
machinery and equipment for round containers, for
packing various products. The importance of our
machines lies in the modern and functional design
based on many years of development, finest workmanship
backed by a team of first class craft men's. Today
the firm is a leader in tin manufacturing machinery
and also an exporter to the sophisticated markets
of the world-a proof of consistent quality. |
| |
| SEAMLESS JOINT |
| |
| Seamless welding joint can be obtained
automatically continually. |
| |
| NO DEFORMATION |
| |
| Width of welded joint is small and
only a little quantity of heat is produced, since
wire electrodes are used. |
| |
| MACHINED FREELY TO ANY SHAPE. |
| |
| Welded bodies can be expanded and
squeezed freely to any shape within the limit of
material's properties, which enables welded cans
to be machined to a degree, ever thought to be impossible. |
| |
| POLLUTION PREVENTIVE EQUIPMENT
NOT HEEDED |
| |
The side seam welder is completely
free from pollution, since it does not produce harmful
substance like in conventional welding operations
by solder and flux. This greatly serves
to provide a comfortable working environment and
does not require any pollution preventive equipment.
Jethwa Automatic Can Equipment co. has a team of
service engineers providing a nationwide coverage
for commissioning including staff instruction routine
servicing and supply of spare parts. Our service
organization ensures prompt, effective
attention to customers' needs at all times. |
| |
| 1)GANG SLITTING MACHINE |
| |
| Gang slitting machine for cutting
out body blank. Slitting of tin sheets into particular
shape and size, simultaneously by assembled sheet
in to strips, the main shaft are hard chromed fitted
with 8 male female steel cutters, duly hardened
and grinded, provided with rubber grippers molded,
fitted with specially made heavy duty with motor
starter and 'V' belts.
|
| |
| 2) CUTTING OF SHEETS (GUILLOTINE
SHEARING MACHINE) |
| |
| These machines are the strongest
treadle guillotines available to-day. The welded
steel plate construction gives the same firm strength
and rigidity, for cutting tin-plate sheets. These
treadle guillotines are unsurpassed in economy,
accuracy and safety. The sheet hold down is built
into the machine. It holds the material very firmly
while cutting takes place and also acts as finger
guard.
|
| |
| 3) ROUND ROLLING MACHINE |
| |
|
The machine serves to roll all sorts of tin bodies
and it has a very high output. It can be operated
easily and can be adjusted rapidly for tin bodies
of various diameters. The rolls are of finest
quality steel and run on gunmetal bearings.
|
| |
| 4) CONTAINER SIDE SEAM WELDER |
| |
| This welding machine is for tin sheets,
black sheets and tin free sheets equipped with wire
feed system, and one complete set of arm assembly
consisting of z-bar , saddle, forming rollers etc.
fully solid state thyristor weld control.
|
| |
| 5) SIMULTANEOUS FOLDING-LOCKING
MACHINE |
| |
The machine forms the hooks and closes
the seam in one operation. No special skill is required
in operating the machine. Tools are supplied for
closing the seams on the inside.
The operator registers the two straight edges in
the gauges provided, presses the foot treadle and
the edges are folded, hooked together and clenched
tight. Thus the side is formed.
|
| |
| 6) DOUBLE ENDED FLANGING MACHINE |
| |
This machine has been developed for
flanging both ands of round cans body specially
for the larger type of decorative can where the
decoration is of the great consideration.
The machine is quickly adjustable for varying sizes;
the left hand flanging head is fixed, the right-hand
head moves along the length of the bed.
|
| |
| 7) DOUBLE ENDED FLANGING MACHINE
(BUMP TYPE) |
| |
|
This machine has been developed for flanging
both ends of round cans body specially for the
larger type of decorative can where the decoration
is of the great consideration. The machine is
quickly adjustable for varying sizes, where the
cans to be placed on the tooling and by paddle
operation takes place.
|
| |
|
|
|
|
| |
